ID: 26993

PCI-E SATA 1X 4X 8X 16X PCI-E Cards PCI Express to SATA 3.0 2-Port SATA III 6Gbps Expansion Adapter Boards with Marvel 9125 chip

4.9 (7 votes) | 16 orders
Price: US $25.12 / piece
Discount Price:
US $ 21.10 / piece
-16%
Ships From
Color
Quantity


Feature:
1. Compliant with Serial ATA Specification 3.0, down compatible with SATA2.0 SATA1.0.
2. Conformance to PCI-Express v2.0 specifications, down compatible with PCI-Express v1.0.
3. Supports communication speeds of 6.0Gbps,3.0Gbps and 1.5Gbps.
4. Supports Gen 1i,Gen 2i,Gen 2m, Gen 2x and Gen 3i.
5. Supports two SATA Ports.
6. Supports AHCI 1.0 and IDE modes.
7. Supports Native Command Queuing(NCQ)
8. Supports Port Multiplier FIS based switching or command based switching.
9. Supports Hot Plug and Hot Swap.
10. Compatible with SATA 6G,3G and 1.5G Hard Drives

Specification:
Product interface: PCI-E 1X 4X 8X 16X
Chipest: Marvel 9125/JMS582B
Support specification: SATA3.0 7PIN
Bus interface: PCI-Express X1 slot
Extension interface: 2 SATA3.0 interfaces
System requirements: there is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16
Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux

Package content:
1 x PCI-E to SATA 3.0 Extension Card
1 x Small and Big Bracket
1 x Screw

Reminder: Speed is related to many factors: computer configuration, slot bandwidth, hard drive itself,

The platform environment and speed measurement software will affect the speed. All expansion cards in this store are not guaranteed

How much speed can you achieve in actual use.

If you want the so-called high-speed, please change the motherboard directly.


1. The best effect can be achieved with SATA3.0 data cable

2. PCI-E must have a slot above V2.0 (GEN2), if V1.0 (GEN1), the speed is

140M-200M, PCI-E whether it is X1 or X16, as long as it is V2.0 version,

If there is a spare X16 slot, just plug it into the X16 slot. Only 16X is GEN2 for motherboards below H81.

1X is GEN1, if you want high speed, please plug it into the 16X graphics card slot.

3. Motherboard BIOS setting: SATA mode should be changed to AHCI, although some motherboards PCIE is version 2.0

Yes, but BOIS does not enable high-speed transmission mode by default (gen2 high speed mode)

Need to be turned on manually.


Reminder: As Lenovo and DELL computers have shielded the BIOS interface of the third-party array card,

It may cause unpredictable compatibility problems. Please be careful when purchasing array cards from Lenovo and Dell computer users.

Place the order carefully, thank you for your cooperation!


SATA3.0 expansion card in PCI-E various speed comparison: (for reference only)

PCI-E 1.0 GEN1 140-200M

PCI-E 2.0 GEN2 350-400M

PCI-E 3.0 GEN3 360-410M


Note:


Product driver files:

CD-ROM: ... DRIVER \ SATA CARD \ Marvell \ 9125, and then select the appropriate folder according to the system

The PCIE to SATA3.0 adapter card is used as follows:

Connection conditions and solutions of system disk and PCIE to SATA3.0 adapter card:

1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to insert a system disk on our card, the premise is that your system disk must be installed in AHCI mode when the system is installed on the motherboard, otherwise it cannot pass. Our card transfer card activates the system.
2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk to the first boot.
3. Both of the above conditions are met. If it still fails to start or restart repeatedly, it may be that the hard disk interface of the motherboard conflicts with our adapter card. The solution is to enter the motherboard BIOS and set the motherboard hard disk interface option to Disabled, save and restart to start the system

Second, the connection conditions and solutions of ordinary disk and PCIE to SATA3.0:

1. When the system disk is inserted on the motherboard and the ordinary disk is inserted on the PCIE to SATA 3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup.

2. If condition 1 is satisfied and the system cannot be started, then enter the motherboard BIOS and set the system disk to the first boot.

Third, the system disk and ordinary disk and PCIE to SATA3.0 connection and solution:

1. Premise, if the system disk with the original motherboard installed system is AHCI mode test, you can use the following methods to achieve it. If the system is installed in IDE mode, then you can only reinstall the system by PCIE to SATA3.0. .

After the conditions of 2 and 1 are satisfied, you cannot enter the BIOS of the motherboard, and set the first system disk as the first boot.

3, 1.2 conditions are met, or can not start, then it may be a conflict of integrated SATA interface, please enter the motherboard BIOS and set SATA to Disabled.



1)We accept alipay here1)We accept alipay here

2)All major credit cards are accepted through secure payment processor Ecscrow


1.WORLDWIDE SHIPPING.(Except some countries and APO/FPO)


2. Orders processed timely after the payment verification.


3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.


4. The images shown are not the actual item and are for your reference only.


5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.

6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap.


1.   12 months Manufacturer’s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.


2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN
EXPIRED WARRANTY.


3.Refund:


1)You have 7 days to contact us and 30 days to return it from the date received. If the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUEA REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!
Shipping cost is bear by both seller and buyer in half.


2). All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.


3). We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from Cntronic. OR, you may choose to have a replacement.

You agree to all of the above-listed policies upon ordering on Cntronic!


1) We maintain high standards of excellence and strive for 100% customer satisfaction!

2) Your satisfied feedback is our power to insist, we request you contact us immediately

before you give us neutral or negative feedback, so that we can satisfactorily address your

concerns, It is impossible to address issues if you do not know about them!





  • Model Number: PCIE TO dual sata card
  • Package: Yes
  • Interface Type: PCI,PCI Express,sata
  • Brand Name: GUDGA
  • Origin: Mainland China
  • Certification: CE
  • Type: Add On Cards

SHIPPING AND DELIVERY

We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.

How do you ship packages?

Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.

Do you ship worldwide?

Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.

What about customs?

We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.

How long does shipping take?

Shipping time varies by location. These are our estimates:

Location *Estimated Shipping Time
United States 10-30 Business days
Canada, Europe 10-30 Business days
Australia, New Zealand 10-30 Business days
Central & South America 15-30 Business days
*This doesn’t include our 2-5 day processing time.

Do you provide tracking information?

Yes, you will receive an email once your order ships that contains your tracking information.

My tracking says “no information available at the moment”.

For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.

Will my items be sent in one package?

For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.

If you have any other questions, please contact us and we will do our best to help you out.

REFUNDS & RETURNS POLICY

Order cancellation

All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.

Refunds

Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.

If you did not receive the product within the guaranteed time(60 days not including 2-5 day processing) you can request a refund or a reshipment.

If you received the wrong item you can request a refund or a reshipment.

If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.

  • Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
  • Your order did not arrive due to exceptional circumstances outside the control of CNTRONIC Consumer Electronics Retailer (i.e. not cleared by customs, delayed by a natural disaster).
  • Other exceptional circumstances outside the control of cntronic.com

*You can submit refund requests within 15 days after the guaranteed period for delivery (60 days) has expired. You can do it by sending a message on Contact Us page

If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.

Exchanges

If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.

Please do not send your purchase back to us unless we authorise you to do so.

LARGE ORDER DEALS

Wholesale

Thank you for your interest doing business with us!

If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.

You may also like these products