Raspberry Pi 3 Model B+/B Starter Kit + Case + 32 GB SD Card + Power Adapter + Cooling Fan + Heat Sink + HDMI-compatible Cable
522.44 $
ID: 83699
Raspberry Pi 3 Model B+ Kit ABS Case + 32GB SD Card + Power Adapter + Heatsinks + Optional 3.5 inch Touch Screen for RPI 3B+
0.0 ( votes) | 2 orders
Price:
US $
526.93
/ piece
Sorry! This item is out of stock
Raspberry Pi 3 Model B+ ABS Case + 32GB SD Card + 3A Power Adapter + Heatsinks Optional 3.5 inch Touchscreen LCD or HDMI-compatible Cable for RPI 3B+
Note: There is only black case available now.
Choose Bundle
The products included in the Bundle 1 to Bundle 6 are listed in following table , please choose the correct Bundle you need. ( Bundle 1,2,3 does not include LCD , Bundle 4,5,6 does not include fan , HDMI-compatible cable)
Introduction :
3.5 inch touch screen is the most popular touch screen for Raspberry Pi . Here we design a dual use ABS case for Raspberry Pi with 3.5 inch touch screen . It means you can use the case to install Raspberry Pi and 3.5 touch screen or install Raspberry Pi with cooling Fan. We need to mention you that when you install the 3.5 inch touch screen , the can't install the cover and fan at the same time. The case has black and transparent to choose.
Please leave a message that which Power Plug ( EU / US / UK / AU ) do you want in the order note , otherwise we will send them by ourselves , please understand.
Features :
Daul Use Case :
(1). Daul use : First use : install Raspberry Pi with 3.5 inch touchscreen ; Second use : install Raspberry Pi with cooling fan ( as the following picture show )
(2). Material : ABS
(3). Color : Black
How to install the 3.5 inch touchscreen :
(1). Install the Raspberry Pi on the base board
(2). Please stick the pad on the back of 3.5 inch touchscreen ( as the picture show ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don't be malposed )
(3). Install the enclosure part
(refer to the video)
The video is the assemble guide , not the packing list. (it does not mean each bundle include the LCD and fan , refer to packing list)
Power Adapter :
(1). Input : 100 - 240V, 50/60Hz AC
(2). Output : 5V 3A , DC
(3). Plug : EU / US / UK / AU ( leave a message in the order for the type you want )
(4). Chariging cable : with ON/OFF switch button on it to cut off or start the power , about 1M length
SD Card :
32GB capacity
Class 10 standard
With USB 2.0 SD Card reader
HDMI-compatible Cable :
HDMI-compatible Male to Male ,
Length :1M
Heatsinks :
2 copper + 1 aluminum heatsinks
3.5 inch touchscreen :
(1). 480*320 resolution , Resistive touch type ( with touch pen )
(2). Supports Raspbian system, ubuntu system ,kali Linux system.
Please use our recommended system for touch screen. If you use other systems, it may not have touch function or may not work. You need to configure it yourself. Because there are many systems that the Raspberry Pi can use, we can’t make every system compatible with our touch screen.
(3). How to use the touch screen.
Please refer to :
http://www.lcdwiki.com/3.5inch_RPi_Display
https://youtu.be/5DAn_5-1Jg4
We also provide configure way for Raspbian system in the bottom of link. If you have any problem about system , please contact us at first time.
This 3.5 inch touch screen connect to Raspberry Pi by GPIO pin , instead of HDMI-compatible port. Because of the resolution limit, the Raspberry Pi doesn't support display on this 3.5 inch touch screen and other HDMI monitor at the same time.
Note:
Please plug the screen on Raspberry Pi's GPIO pins correctly( as the picture) , otherwise the touch function will be damaged.
Packing List :
Different bundle contain different products.
Bundle 1 :
1 x Raspberry Pi 3 Model B+
1 x Black ABS Case
1 x Cooling Fan
3 x Heat Sinks
1 x 32GB TF Card
1 x USB Card Reader
( as following picture show )
Bundle 2 :
1 x Raspberry Pi 3 Model B+
1 x Black ABS Case
1 x Cooling Fan
3 x Heat Sinks
1 x 32GB TF Card
1 x USB Card Reader
1 x 3A Switch Power Adapter
( as following picture show )
Bundle 3 :
1 x Raspberry Pi 3 Model B+
1 x Black ABS Case
1 x Cooling Fan
3 x Heat Sinks
1 x 32GB TF Card
1 x USB Card Reader
1 x 3A Switch Power Adapter
1 x 1M HDMI-compatible Cable
( as following picture show )
Bundle 4 :
1 x Raspberry Pi 3 Model B+
1 x 3.5 inch Touch Screen
1 x Touch Pen
1 x Black ABS Case
3 x Heat Sinks
( as following picture show )
Bundle 5 :
1 x Raspberry Pi 3 Model B+
1 x 3.5 inch Touch Screen
1 x Touch Pen
1 x Black ABS Case
3 x Heat Sinks
1 x 32GB TF Card
1 x USB Card Reader
( as following picture show )
Bundle 6 :
1 x Raspberry Pi 3 Model B+
1 x 3.5 inch Touch Screen
1 x Touch Pen
1 x Black ABS Case
3 x Heat Sinks
1 x 32GB TF Card
1 x USB Card Reader
1 x 3A Switch Power Adapter
( as following picture show )
How to use it with Raspbian system
This LCD Module need install driver first.
Step 1：Download the Raspbian IMG
https://www.raspberrypi.org/downloads/raspbian/
Step 2: Burn the system image
If you don't know how to do that,you can refer to the Raspberry Pi office tutorial
Step 3: Open terminal(SSH) and install the driver on RaspberryPi
(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)
Run:
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show
Wait A Few Minutes, when the system reboot ok, you can see that.
Touch screen calibration
This LCD can be calibrated using a program called xinput_calibrator
1. Install it with the commands :
cd LCD-show/
sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb
2. Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
3. Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
4. You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).
/ect/X11/xorg.conf.d/99-calibration.conf
5. Save the touch parameters (may differ depending on LCD) to 99-calibration.conf
- Brand Name: Raspberry Pi
- Demo Board Type: ARM
- Origin: GB(Origin)
- ROM Capacity: None
- Model Number: Raspberry Pi 3 Model B+
- Memory Capacity: 1GB
- Processor Brand: BROADCOM
- Intergrated Feature: bluetooth
- Interface: USB OTG
- Certification: CE,RoHS,KC
- LCD: Touch Screen ( only bundle 4,5,6 contain it)_
- Case: ABS Case ( Dual-use )
- SD Card: 32GB , Cass 10 Standard
- Case Color: Black
- Power Adapter: 5V 3A , with ON/OFF switch
- Cooling Fan: Only Bundle 1,2,3 contain it
- HDMI-compatible Cable: Only Bundle 1,2,3 contain it
SHIPPING AND DELIVERY
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
How do you ship packages?
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Do you ship worldwide?
Yes. We provide free shipping to over 200 countries around the world. However, there are some location we are unable to ship to. If you happen to be located in one of those countries we will contact you.
What about customs?
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
How long does shipping take?
Shipping time varies by location. These are our estimates:
| Location | *Estimated Shipping Time |
|---|---|
| United States | 10-30 Business days |
| Canada, Europe | 10-30 Business days |
| Australia, New Zealand | 10-30 Business days |
| Central & South America | 15-30 Business days |
Do you provide tracking information?
Yes, you will receive an email once your order ships that contains your tracking information.
My tracking says “no information available at the moment”.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system.
Will my items be sent in one package?
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
REFUNDS & RETURNS POLICY
Order cancellation
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Refunds
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time(60 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve receive you may request a refund but you must return the item at your expense and the item must be unused.
- Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
- Your order did not arrive due to exceptional circumstances outside the control of CNTRONIC Consumer Electronics Retailer (i.e. not cleared by customs, delayed by a natural disaster).
- Other exceptional circumstances outside the control of cntronic.com
*You can submit refund requests within 15 days after the guaranteed period for delivery (60 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
Exchanges
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.
LARGE ORDER DEALS
Thank you for your interest doing business with us!
If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.
