JAYO 3D Printer PLA/PLA Meta/PETG/PLA PLUS/PLA Matte Filament 1.75mm 10 Rolls 3D Printing Materials for 3D Printer&3D Pen

1.PLA Meta Filament Features & Parameter:

PLA Meta Product Parameter:

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 185-195℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles
Net weight: 1.1KG/roll,0.65KG/roll

PLA Meta Filament Features :

1. Environmentally friendly, non-toxic and biodegradable
2. High strength and rigidity
3. Soft and warm colors
3. Low shrinkage
5. 【Good toughness, not easy to break easily】: The toughness of PLA Meta is similar to the existing PLA+, it achieves high purity, low shrinkage and excellent layer adhesion, meeting your needs for higher quality functional parts printing projects
6. 【Printing temperature 180~200° (reduced and printing temperature range increased)】:
* Lower printing temperature means more energy saving and environmental protection, reducing printer loss.
* The wider printing temperature range means that customers have a larger operating space, and the printing failure rate caused by improper temperature settings is greatly reduced.
7. 【Not easy to draw】: The printing model effect is better than our current PLA and PLA+. The surface of the model has a good visual effect and is not easy to draw. This is especially noticeable when printing suspended models.
8. 【Good fluidity】: The printing fluency is better than the existing PLA and PLA+, which greatly improves the printing success rate

2.PLA Filament Features & Parameter:

PLA Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-210℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

PLA Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork and industrial design samples
Grade

3.PLA PLUS Filament Features & Parameter:

Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 205-215℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

PLA PLUS Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements.

4.PETG Filament Features & Parameter:

PETG Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 230-240℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M

PETG Filament Features:

1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.

5.PLA matte Filament Features & Parameter:

PLA matte Product Parameter:

Wire diameter: 1.75mm
Tolerance: ± 0.02MM
Printing temperature: 205-215 ℃
Bottom plate temperature: Apply glue when not heated
Heating 50-60 ℃ without applying glue
Printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1.1KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM (1KG)=330M

PLA Matte Filament Features

1. 【PLA Features & Matte Color】- JAYO's newly upgraded Matte PLA Filament colors retain the original JAYO PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models.

2. 【SUNLU 100% Wound Neatly 3D Filament】- JAYO R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.

3.【Recommend Settings & Easy to operate】- We recommend printing the PLA Matte Filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s. JAYO PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.