DSLRKIT 250M 8 Ports 6 PoE Switch Injector Power Over Ethernet NO Power Adapter

DSLRKIT MID4P2U-E250 Passive PoE Injector Switch

Support EXTEND mode, max Network Cable length to 250 meters

Power supply not included

Supports 12~55V DC power supply

(Maximum current 4 amps)

DC IN port 5.5X2.1mm, inside positive (+)  outside  negative (-)

6 Ports (2Uplink, 4 PoE) 10/100Mbps

Midspan Mode-B Unsolicited Power(4,5+/7,8-)

Wall Mount

NOTE. When EXTEND mode enable, the Max bandwidth for the Power Link (PoE) port 1-4 network port will be reduced to 10Mbps for each one. Please check your IP CAMERA's  bit stream setting. We recommend the value does not over 8Mbps(8192Kbps).

(The up-link is not affected, it will always working at 100Mbps max speed)

Notice! 
If you switch to the EXTEND mode, the Max allowable Network Cable length will increased to 250 meters. Then suggested buy 52V power adapter. This will avoids the power loss over the long distances, and will make sure the PoE IP Camera working.

52V Power adapter links:

52V1.85A https://www.Cntronic.com/store/product/52V-1-85A-96Watt-AC-to-DC-Power-Supply-Adapter-100-240V-for-PoE-Switch-Injector/100107_32803303203.html?spm=2114.12010615.0.0.3907b8fb1Py9ky

52V2.7A https://www.Cntronic.com/store/product/52V-2-7A-140Watt-AC-to-DC-Power-Supply-Adapter-100-240V-for-PoE-Switch-Injector/100107_32803259823.html?spm=2114.12010615.0.0.3907b8fb1Py9ky

48V Power adapter links:
48V2Ahttps://www.Cntronic.com/store/product/AC-100-240V-to-DC-48V-2A-96W-Power-Adapter-5-5mm-x-2-5-2/100107_32679323418.html?spm=2114.12010615.0.0.3dc786abLhhR9I

48V3Ahttps://www.Cntronic.com/store/product/AC-100-240V-to-DC-48V-3A-120W-Power-Adapter-Port-5-5mm-x-2-1mm/100107_32390589652.html?spm=2114.12010615.0.0.3dc786abLhhR9I

This item do not include the power adapter,  you need to buy an extra power adapter according to your requirement. So it only suitable for PoE professional customers.

Please select the correct Power adapter by POE device，
802.3af (802.3at Type 1) PoE device, We suggest DC 48V power adapter.
802.3at Type 2 PoE+(plus) device, We suggest DC52V power adapter.
Please refer to the Wikipedia "Power over Ethernet" section, under the "Standard implementation" paragraph. 

If your camera is with word “12V/PoE” as this picture shows, then please select 48V(or 52V) Power Adapter, do not select 12V Power Adapter. 

Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V PoE Ethernet port:

This is an Passive Power Over Ethernet of 6 port 10 / 100Mbps-T Ethernet switches, including 4 unsolicited PoE Ethernet ports and 2 Uplink ports. DC port apply 12~55V power supply adapter(not included), any one of the 4 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.

This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because  "Power Link 1~4" port using 4,5,7,8 pin as power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 1~4" port, this will damage your device.

Gigabit(1000Mbps) ethernet devicePlease do not access "Power Link port" this will damage your device.

Features:

• 6 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 4-Ports PoE function

• Switch Controller Chips Realtek RTL8309N

• Support EXTEND mode, max Network Cable length to 250 meters. 

• Midspan Mode-B Unsolicited Power(4,5+/7,8-)

• Supports 12~55V DC power supply  

• Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.

• Full/half duplex transfer mode for each port

DSLRKIT PSE4P1UGK Gigabit PoE+ Switch

5 Ports (1Uplink, 4 PoE) Power Over Ethernet Switch

IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-)

Auto Detection Powered Device

AC Input: 100V ~ 240V

48VDC up to Max. 30W/port, 4ports Total budget 48Watt

10/100/1000Mbps ,Wall Mount

It is easy to connect. With data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Providing 4 PoE interfaces, the Switch is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively.

Compatible all 802.3af/802.3at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....

Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port

Features:

• Supports Virtual LAN(VLAN) ON/OFF
  (When the VLAN mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety.)
  

• Up to 30w/port of Power on

• Complies to IEEE 802.3af/802.3at PoE standard

• Compatible with All IEEE 802.3af/802.3at

• Safe: Low power Devices Receive Only the Power They Need

• Safe and Reliable Power to WLAN Access Points

• Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port

• Supports 10/100/1000 Base-T

• Compact Design Fits Easily in WLAN Access

• Plug-and-Play no configuration required

• Each port supports auto MDI/MDIX

Specification:

Item Included:

 DSLRKIT PSE4P1UGK PoE switch x1(with Retail Box)
 AC Power Adapter(DC OutPut: 48V1A) x1
 AC Power Cable x1

AC power plug is US, EU or AU type,if you need other type (UK),Please leave a message.

12 Months Warranty from the data of purchase.